Hand Made Speaker Stands

Over the years, I’ve made a range of different styles of speaker stand. Each one handmade and custom designed to match the client’s requirements. So far, they have fallen into a few common themes, so here’s a quick round up, and also potentially a few ideas for new designs.

If you have a requirement or even just an idea at this stage, just get in touch. mike@homestudiorack.co.uk

Simple “Riser” style speaker stands

These are typically to raise your speakers/monitors off your workdesk or workstation. These can be made any size in this form, but above a certain size I’ll sometimes add cross pieces below the top for added strength. I normally include foam tape to the bottom of the legs, for some basic sound isolation.

These are 18mm birch plywood and glued + screwed. All holes plugged (so you only see the wooden plug, not the screws) – These riser style speaker stands are very sturdy (you can stand on them) – they will last a lifetime. Supplied fully assembled.

If you’re interested in a simple speaker stand like this, just contact me with the width, depth and height you would like, and I’ll drop you back a sketch and confirm a price. mike@homestudiorack.co.uk

Custom Angled Speaker Stands

In order to accomodate optimised listening, sometimes it’s necessary to have your speakers at an angle.

As these are custom built, I can make the angle anything required (just let me know) There’s loads of resources online about optimising your speaker positions.

Typically I include a lip on the back edge to ensure your speakers, don’t fall off the back! and foam tape to reduce the chance of vibration.

These are 18mm birch plywood and glued + screwed. All holes plugged (so you only see the wooden plug, not the screws) – These custom made angled style speaker stands are very sturdy (you can stand on them) – they will last a lifetime. Supplied fully assembled.

If you’re interested in a simple speaker stand similar this, just contact me with the width, depth and height you would like, and I’ll drop you back a sketch and confirm a price. mike@homestudiorack.co.uk

Custom “Cabinet Style” Speaker Stands

These stands are more “box” like and again can be any size. Often the shelf space is used for storing vinyl. I can add castors or spikes on these if required. I’ve even done these sitting on a separate wheeled “trolly” for make it easier to move them about, but not part of the main stand.

To chat about any ideas or requirements, just drop me a mail: mike@homestudiorack.co.uk

Bespoke Speaker Stands

Sometimes I have a request for a completely bespoke stand for a specific pair of speakers or individual speaker.

I can essentially design something to suit your requirements, and work through the design with you until we have something that matches exactly what you’re after. It might take a few iterations, but this is all part of the process, and it’s best to do this at the design stage, than half way through production.

Here are a few examples of bespoke “specials”

If you have any ideas or requirements, just reach out. mike@homestudiorack.co.uk